Commit message

This commit is contained in:
support.sampyo 2024-05-23 06:12:49 +00:00
parent 3a30bba1ef
commit f5f155c1bc
2 changed files with 17 additions and 13 deletions

View File

@ -7,5 +7,5 @@ spec:
virtualEnv: base # 사용할 가상환경 이름입니다.
package: requirements.txt # 설치할 Python 패키지 정보 파일입니다.(기본 값은 requirement.txt 입니다.)
stackbase:
tagName: v0.0.19 # Stackbase(gitea)에 릴리즈 태그명 입니다.
tagName: v0.0.20 # Stackbase(gitea)에 릴리즈 태그명 입니다.
repoName: sampyo-dio # Stackbase(gitea)에 저장될 저장소 이릅니다.

28
main.py
View File

@ -62,7 +62,7 @@ def Measure_Weight(client):
val = result.registers[0]
val -= 1000
val /= 1000
print(f'value: {val}')
#print(f'value: {val}')
except Exception as e:
pass
@ -103,6 +103,10 @@ def Command_Read():
Valve_MixedWater(chip=output_lines, status=status, action='On')
time.sleep(0.5)
Valve_EnterWater(chip=output_lines, status=status, action='On')
time.sleep(0.5)
Valve_Vent(chip=output_lines, status=status, action='On')
time.sleep(vent_holding)
Valve_Vent(chip=output_lines, status=status, action='Off')
time.sleep(mixed_duration)
Valve_MixedWater(chip=output_lines, status=status, action='Off')
time.sleep(0.5)
@ -142,24 +146,24 @@ def Command_Read():
# time.sleep(1)
# Vent and Clear sequence
# 1) Open Vent and wait for 2 sec
Valve_Vent(chip=output_lines, status=status, action='On')
time.sleep(vent_holding)
# 2) Motor On
# 1) Motor On
Motor(chip=output_lines, status=status, action='On')
time.sleep(0.5)
# 3) Input Pure Water
# 2) Input Pure Water
Valve_PureWater(chip=output_lines, status=status, action='On')
time.sleep(0.5)
Valve_EnterWater(chip=output_lines, status=status, action='On')
time.sleep(pure_duration + pure_holding)
Valve_PureWater(chip=output_lines, status=status, action='Off')
time.sleep(0.5)
Valve_PureWater(chip=output_lines, status=status, action='Off')
time.sleep(0.5)
time.sleep(vent_holding)
# 3) Open Vent
Valve_Vent(chip=output_lines, status=status, action='On')
time.sleep(pure_duration)
Valve_PureWater(chip=output_lines, status=status, action='Off')
time.sleep(0.5)
Valve_EnterWater(chip=output_lines, status=status, action='Off')
# 4) Wait until empty
time.sleep(vent_duration)